CC-4P / CC-4PTRoHS

Universal Enamelled-Wire Stripping Powder

🧪CC-4P / CC-4PTUniversal Enamelled-Wire Stripping PowderPhoto to be added; data per written technical sheet

Features

电子电工行业高强度漆包线和多层线专用快速去漆工艺材料。
对漆包线种类没有选择、对金属基体无腐蚀、去漆迅速、对多股细线不粘结，去漆后芯线可焊性良好。
可以去除各种漆膜，对漆包线没有选择，故称万能去漆粉；能轻易去除各种高强度漆包线漆膜，可应用于所有漆包线去漆，能替代 CC-4B。
不燃、不腐蚀线芯金属；残余去漆粉易于清洗；能够处理各种线径的漆包线。
去漆后芯线可焊性良好且持久性较好，对铝芯漆包线最有价值。
推荐工艺：先加热熔化去漆粉（可用锡炉或铁容器置电炉上熔化）→ 将待除漆部位浸入熔化的 CC-4P 中 2–3 秒至漆皮剥离后取出 → 用湿布擦去残余去漆粉 → 用布沾乙醇清洗并擦干（尽快进入焊接等后续工序，一般可免除此步）。
注意：操作请在通风条件下进行并戴好防护用品（如纱手套）；不慎溅到身上请及时用毛巾擦去，再用肥皂水洗涤；用毕及时盖好。
与 CC-4B/T 的选择：CC-4B/T 室温使用最方便，任何场所可用；CC-4P 需加热高温使用，操作略繁，但能处理 CC-4B 难以应对的漆膜并改善铝面可焊性。

适用线型	各型 QQ / QA / QZ / QHN / QZY / QY、三层线等超高强度电磁漆包线
工艺	加热熔化后浸渍 2–3 秒
特点	不燃、不腐蚀线芯、多股细线不粘结
清洗	残余粉易清洗，湿布 + 乙醇
可替代	CC-4B
环保	通过 RoHS 测试
安全	通风操作，戴防护用品

去漆粉高温漆包线铝芯线三层线RoHS

For a datasheet, SGS/CTI report, sample or quotation, tell us your base metal, process and throughput and we will recommend a grade.

Data consolidated from published CNOFC literature; confirm against a written technical agreement and sample trials before production.

Immersion Type Paint Stripper

General immersion stripper for the coatings trade: shifts alkyd, nitro, amino, acrylic and epoxy films, and clears paint from plastic parts.

Fast Immersion Paint Stripper

Built for high-strength epoxy, powder-coat and e-coat finishes; fast acting and will strip PCB solder mask right off.

Plastic-Safe Stripper / Ink Remover

Made to lift paint and screen-printed markings off plastic parts without attacking the substrate.

Brush-Type Fast Paint Stripper

For spot stripping and repair - large parts that cannot be immersed, and localised PCB solder-mask removal.

Enamelled-Wire Fast Stripper

Made for localised stripping of magnet wire - shifts most enamel films in 0.5-2 min and still works above 0C in winter.

High-Temperature Magnet-Wire Stripper Series

Designed for high temperature-class magnet wire: strips at room temperature, CC-4X goes up to 220C class, CC-4M is for automatic lines.