CC-1RoHS
Immersion Type Paint Stripper
Features
- 适用于小型、大批量零件全面脱除漆膜的场所，也适合临时处理小批量产品与小企业应用。
- 可除去调合漆、硝基漆、胺基漆、醇酸漆、丙烯酸漆、环氧漆等各型喷涂、刷涂类溶剂型涂料涂膜。
- 可用于塑料制品表面的漆膜清除；塑料件推荐使用 CC-1B 型塑料去漆剂。
- 对通风条件欠佳、工人对化工作业不太熟悉、对除漆速度要求不高的小规模作业最为合适。
- 允许把产品整体浸泡于去漆剂中的场合使用。
- 传统旧式去漆剂只能缓慢除去调和漆、硝基漆，至多氨基漆，无法处理现代静电喷塑漆、电泳漆与漆包线漆；本系列即为解决这类苛刻要求而开发。
- 工序返修等待时间较长、需要防锈的场合，可提供带防锈能力的 B 型产品。
Technical Data
| 工艺 | 常温浸泡 |
| 适用涂膜 | 调合 / 硝基 / 胺基 / 醇酸 / 丙烯酸 / 环氧 |
| 塑料件型号 | CC-1B |
| 防锈型号 | B 型 |
| 适合 | 小规模、通风一般、速度要求不高 |
| 注意 | 整体浸泡工艺 |
Applications
Enquiries & Samples
For a datasheet, SGS/CTI report, sample or quotation, tell us your base metal, process and throughput and we will recommend a grade.
Data consolidated from published CNOFC literature; confirm against a written technical agreement and sample trials before production.
Related Grades
CC-2 / CC-2B
Fast Immersion Paint Stripper
Built for high-strength epoxy, powder-coat and e-coat finishes; fast acting and will strip PCB solder mask right off.
CC-2X
Plastic-Safe Stripper / Ink Remover
Made to lift paint and screen-printed markings off plastic parts without attacking the substrate.
CC-3A / CC-3B / CC-3E
Brush-Type Fast Paint Stripper
For spot stripping and repair - large parts that cannot be immersed, and localised PCB solder-mask removal.
CC-4B / CC-4T / CC-4A
Enamelled-Wire Fast Stripper
Made for localised stripping of magnet wire - shifts most enamel films in 0.5-2 min and still works above 0C in winter.
CC-4P / CC-4PT
Universal Enamelled-Wire Stripping Powder
Shifts every type of high-temperature magnet-wire enamel with no grade selectivity, and markedly improves core solderability afterwards - especially valuable on aluminium wire.
CC-4K / CC-4T / CC-4X / CC-4M
High-Temperature Magnet-Wire Stripper Series
Designed for high temperature-class magnet wire: strips at room temperature, CC-4X goes up to 220C class, CC-4M is for automatic lines.