F005RoHS
High-Activity Flux (Electrical Grade)
Features
- 面向电工行业简易、高活性需求开发。
- 与 S502 / S602 低成本焊丝配套使用，可显著压低材料成本。
- 上锡快、活性强，适合对残留物要求不高、以作业速度为先的场合。
- 属于我们第四代焊剂配方体系，对各类焊料具有普适性。
- 如焊后需要清洗，可配合 W118 洗板水或水洗添加剂使用。
- 特殊工艺要求可另行开发专用型号。
Technical Data
| 定位 | 电工简易高活性 |
| 配套焊丝 | S502 / S602 |
| 工艺 | 手工焊 / 浸焊 |
| 配方代次 | 第四代 |
Applications
Enquiries & Samples
For a datasheet, SGS/CTI report, sample or quotation, tell us your base metal, process and throughput and we will recommend a grade.
Data consolidated from published CNOFC literature; confirm against a written technical agreement and sample trials before production.
Related Grades
酸性镀锡光亮剂
Acid Tin Plating Brightener
Brightener for acid sulphate tin plating: a fine, bright, white deposit with excellent, storage-stable solderability - suited to component leads, leadframes and connectors.
F116 / F116R / F116T
Resin-Type No-Clean Flux
Medium-solids resin no-clean flux. Pale film, high gloss, very little fume - ideal for lines without extraction.
F101 / F101B / F101R
Water-Soluble Flux
High activity, fast wetting - even heavily oxidised terminations tin in one pass. Residue washes off with plain water.
F114 / F114B / F114C
General-Purpose Resin Flux
For hand iron and wave soldering; runs on low-cost S502/602 solder to cut manufacturing cost.
F117 / F117B / F119
Pre-Coating Flux
PCB pre-coating for oxidation protection and solderability. Very high activity; F119 is the low-solids grade for dense and multilayer boards.
F105 / F105A
High-Activity Aluminium Soldering Flux
Developed for aluminium-to-copper replacement in electrical work. Joins Al+Al, Al+Cu, Al+Fe/stainless, Al+Ni, Al+Zn and their alloys.